User Tools

Site Tools


Natural Inspiration


Frame Prototype

Prototype V1

Cardboard frame with textured cardboard

Wood Frame

Made with two 12in diameter inorganic circles with 8in diameter inorganic openings. Upper support beams are 14in x 2in with bottom Beam 14in x 3in for lower center of mass.

Cardboard Bark

Cut on 14in x 38in piece of cardboard following vector mapping of tree bark. Cardboard is not cut through rather the top layer is scored by lazer to allow for cardboard to bend.

Camera Mounting

Camera is a pi-zeroW with IR camera and battery pack. Pi and camera are house in a folded piece of cardboard stuck to the battery. The back of the battery have velcro which can be stuck to the top support beam.

Final Video

blake_hampton_final_project.txt · Last modified: 2019/08/12 03:12 by radical